Synthesis, characterization, and reactivity of half-sandwich Ru(II) complexes containing phosphine, arsine, stibine, and bismutine ligands

The synthesis and some reactions of the Ru(II) and Ru(IV) half-sandwich complexes [RuCp(EPh₃)(CH₃CN)₂]⁺ (E=P, As, Sb, Bi) and [RuCp(EPh₃)(η³-C₃H₅)Br]⁺ have been investigated. The chemistry of this class of compounds is characterized by a competitive coordination of EPh₃ either via a RuE or a η⁶-arene bond, where the latter is favored when the former is weaker, that is in going down the series. Thus in the case of Bi, the starting material [RuCp(CH₃CN)₃]⁺ does not react with BiPh₃ to give [RuCp(BiPh₃)(CH₃CN)₂]⁺ but instead gives only the η⁶-arene species [RuCp(η⁶-PhBiPh₂)]⁺ and [(RuCp)₂(μ-η⁶,η⁶-Ph₂BiPh)]²⁺. Similarly, the EPh₃ ligand can be replaced by an aromatic solvent or an arene substrate. Thus, the catalytic performance of [RuCp(EPh₃)(CH₃CN)₂]⁺ for the isomerization of allyl-phenyl ethers to the corresponding 1-propenyl ethers is best with E=P, while the conversion drops significantly using the As and Sb derivatives. By the same token, only [RuCp(PPh₃)(CH₃CN)₂]⁺ is stable in a non-aromatic solvent, whereas both [RuCp(AsPh₃)(CH₃CN)₂]⁺ and [RuCp(SbPh₃)(CH₃CN)₂]⁺ rearrange upon warming to [RuCp(η⁶-PhEPh₂)]⁺ and related compounds. In addition, the potential of [RuCp(EPh₃)(CH₃CN)₂]⁺ as precatalysts for the transfer hydrogenation of acetophenone and cyclohexanone has been investigated. Again aromatic substrates are clearly less suited than non-aromatic ones due to facile η⁶-arene coordination leading to catalyst's deactivation.     

Chemical analysis of rain and snow samples from Chernogolovk/Russia by IC, TXRF and ICP–MS

 Data are reported for a first measurement campaign for a great number of cations (the range of concentrations for main components is given in ng/mL: Na:<70–880; Mg: 12–160; Al:<7–120; K: 200–1600; NH₄ ⁺: 2500–9000; Ca: 300–2500; Fe:<140–1200; Zn: 20–320) and anions (HCOO^-: 100–1800; CH₃COO^-: 400–14500; C₂O^2- ₄: <100–460; NO^- ₂: <20–55; NO^- ₃: 660–9900; SO^2- ₃:<100–1150; SO₄ ^2-: 450–19700; Cl^-: 170–3200) in rain and snow samples of the Chernogolovka region 80 km northeast of the centre of Moscow. These data serve as a first assessment of the situation of the atmosphere in this region. For the determination of fluoride, formate, acetate, nitrite, bromide, nitrate, sulfite, and sulfate by IC, a relevant development of the method was carried out. For some metallic cations, a critical quality control was achieved by parallel measurements with ICP-MS, TXRF, and IC. Furthermore, time resolved measurements were performed for a rain event. Filtration experiments were undertaken to differentiate between the presence of a series of elements and species in liquid or solid state in the collected aqueous samples. Received: 25 July 1996 / Revised: 26 September 1996 / Accepted: 13 October 1996     

The fluorescence of biliverdin dimethyl ester

Freshly prepared solutions of biliverdin dimethyl ester ( 2 ) in ethanol showed fluorescence maxima at 710 and 770 nm [Φ_F = 1.1. 10^?4 (room temperature) and 5.0 10^?4 (77 K)]. The maxima of monoprotonated 2 at 77 K were shifted to 725 and 806 nm and the quantum yield was increased to 2.6. 10^?2. This acid effect was reversible by neutralization with base. When a neutral solution was kept standing in the dark at room temperature, or when an acidic solution was neutralized by base, an additional fluorescence maximum at 500 nm with a mirror image excitation spectrum with λ_max = 470 nm developed, which disappeared on addition of acid and which is attributed to a chemical change of 2 .     

The Enantioselective Synthesis of 3-Methoxy-1, 3, 5 (10)-estratrien-11, 17-dione by a Thermal Intramolecular Cycloaddition Reaction. Preliminary communication

The enantiomerically pure (+)-3-methoxy-1, 3, 5 (10)-estratrien-11, 17-dione 11 (with trans-anti-trans configuration) was synthesized in a highly stereocontrolled fashion from (±)-t-butyl 4-methoxy-1-benzocyclobutene carboxylate (8) and the (+)-carboxylic acid 6 , obtained from 4 in two steps, followed by one crystallization of the (+)-ephedrine salt. The key step 10→11 (Scheme 2) involves a thermal intramolecular cycloaddition reaction.     

EFFECTS OF BOUND MONOCLONAL ANTIBODIES ON THE DECAY OF THE PHOTOTRANSFORMATION INTERMEDIATES I1,21700 FROM NATIVE Avena PHYTOCHROME*

Abstract–Thc kinetics of the microsecond phototransformation intermediates of 124 kDa Avena phytochrome (1700^1,2) were studied in the prcsence of bound monoclonal antibodies at various temperatures. A global analysis was applied to the decays at all wavelengths at each temperature in order to derive the rate constants and the decay-associated spectra of the three decay components. Monoclonal antibodies bound to specific epitopes altered the Arrhenius parameters of both 1700^1,2 decay components. The strongest influence on these parameters was observed with OAT 8 (epitope between residues 624 and 686), which decreased by more than 50% the activation parameters of both components. This decrease is interpreted to result from an increased flexibility induced by this antibody in the ground state or in the transition state of bonds changing during the decay of both 1700 transients. Thus, the OAT 8 cpitope appears to be functionally important during the decay of the 1700^1,2 intermediates. For the case of 1100¹ bound OAT 23 and OAT 25 (epitopes between residues 1 and 66) reduced even further the relatively small flexibility of these bonds in the red light-absorbing form of phytochrome (P1) without antibodies, as reflected by the high preex-ponential factors for its decay. This resulted also in higher activation energies for this decay in the presence of the antibodies. Thus, the amino-terminus should act as a rigid spacer of the chromophore cavity without affecting it during the microsecond transformation, because the Arrhenius parameters for these decays are similar to those for small phytochrome. The possible implications of the influence of the various antibodies on the bleaching remaining after the decay of 1700^1,2 are discussed.     

Synthese und Eigenschaften von Dimolybdän-μ-nitrido-heptachlorid Mo2NCl7

Synthesis and Properties of Di-molybdenum-μ-nitrido-heptachloride, Mo₂NCl₇ Mo₂NCl₇ was prepared by the reaction of molybdenum pentachloride with the bromide of Millon's base, [Hg₂N]Br, in boiling CCl₄. It forms a moisture sensitive, dark green crystal powder, the magnetic moment at 20°C (μ_eff = 0.95 B.M.) being strongly reduced. With acetonitrile the μ-nitrido complex Mo₂NCl₇ · 3CH₃CN is formed, with phosphoryl chloride the donor acceptor complex Mo₂NCl₇ · 2POCl₃, respectively. Partial oxidation of the latter complex with chlorine leads to very unstable Mo₂NCl₈ · 2POCl₃, from which (PPh₄)₃[Mo₃NCl₁₀] can be obtained by the reaction with PPh₄Cl. For the complex (PPh₄)₃[Mo₂NCl₁₀] is also found a reduced paramagnetism of μ_eff = 1.47 B.M. at 20°C. All complexes are characterized by i.r. spectroscopy.     

Is laser-ablation-ICP-MS an alternative to solution analysis of solid samples?

The basic obstacles for the general use of laser-ablation(LA)-ICP-MS in analytical laboratories are connected with its reproducibility and calibration. A mathematical relation deduced from the correlation function of the analytical signals allows the estimation of the number of craters needed for representative analyses. The procedure was applied to different samples such as manganese crusts and soils. The ion intensities of the major elements in the manganese crusts and nodules were used as internal standards, improving relative standard deviations by factors between 2 and 3. Selected samples of wood and manganese crusts were analyzed by LA-ICP-MS and the results compared with those obtained by solution ICP-MS. The agreement of the values is within the 95% confidence limits. Powdered reference materials and, in the case of wood analysis, cellulose doped with standard solutions were used for the calibration.     

Dioxomolybdenum(VI) complexes of 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone

Mixed ligand complexes of dioxomolybdenum(VI) with 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone (H₂L) were prepared with the formula [MoO₂(L)D] (D = H₂O, methyl, n-butyl, and n-undecyl alcohol, DMF, DMSO, pyridine, 4-picoline, and 3,5-lutidine). The compounds were characterized by elemental analysis, IR and ¹H NMR spectroscopy. The thermal decomposition of the compounds were investigated by using TGA, DTG, and DTA methods in air, and the thermal behavior depending on the second ligand molecule was discussed. A single crystal of the DMF coordinated complex was studied by X-ray diffractometry. The text was submitted by the authors in English.     

Vesicle Phases with Semipolar Additives

We examined the influence of semipolar additives on the phase behavior of mixed zwitterionic surfactant/consurfactant systems. It is shown that in these systems with increasing concentration esters like hexylacetate (HA) and ketones like hexylmethylketone (HMK) can behave both like consurfactants and like hydrocarbons. In solutions of 200 mM tetradecyldimethylamineoxide (TDMAO)/cosurfactant the additives cause first a phase transformation from the micellar L(1) phase to a lamellar L(alpha) phase. Upon further increasing concentration, the L(alpha) phase is transformed into a microemulsion. The L(alpha) phase consists of densely packed multilamellar vesicles. The vesicles are shown by electron microscopy. The multilamellar character of the vesicles is also reflected in the conductivity of the phase. It is up to 10 times lower than the conductivity of the L(1) phase. In some systems the vesicles are transformed on rest into a multidomain stacked L(alpha) phase. It is furthermore demonstrated that the two-phase L(1)/L(alpha) region in these systems is very narrow. In situations where enough HA is added to be close to the boundary of the L(1) phase, it is shown that very small amounts of cosurfactant can transform the L(1) phase into the L(alpha) phase. In extreme situations 1 mM cosurfactant is sufficient for transforming the L(1) phase with 200 mM TDMAO into the L(alpha) phase. In the investigated systems the L(alpha) phase is a highly viscoelastic fluid in which the storage modulus is 1 order of magnitude larger than the loss modulus. Besides the conventional way to prepare samples by adding all ingredients and stirring the solution intensively, all investigated systems were additionally prepared without applying any shear forces. In a surfactant/cosurfactant solution the additive was brought into the sample by diffusion. The phase behavior of both types of samples showed fundamental differences in some cases, which give insight into the influence of shear forces on these systems. Copyright 2001 Academic Press.     

Crystal structure and spectroscopic characterization of K8(VO)2O(SO4)6

Red and yellow dichroistic crystals of a vanadium(V) compound, potassium (mu-oxo, di-mu-sulfato)bis(oxodisulfatovanadate), K(8)(VO)(2)O(SO(4))(6), have been obtained from the ternary catalytic model melt system K(2)S(2)O(7)[bond]K(2)SO(4)[bond]V(2)O(5). By slow cooling of the melt from 420 to 355 degrees C, crystal growth occurred, using solid V(2)O(5) crystals present in the melt as nucleation promoter. The compound crystallizes in the monoclinic space group P2(l) with a = 13.60(9) A, b = 13.93(9) A, c = 14.05(9) A, beta = 90.286(10) degrees, and Z = 2. It contains two VO(6) octahedra linked together by a mu-oxo and two mu-sulfato bridges. Furthermore, each octahedron has two monodentate sulfate ligands, making the dimeric entity coordinatively saturated. IR spectroscopy shows bands arising from V[bond]O[bond]V and V[double bond]O stretches as well as splitting of sulfate bands due to the different degrees of freedom present for different conformations of sulfate ligands. The coordination of vanadium in K(8)(VO)(2)O(SO(4))(6) is discussed in relation to the reaction mechanism of SO(2) oxidation catalysis.